CCP06BP2PS1
Café CCP06BP2PS1 Beverage Center Repair
Most common issues on this model
- Interior warmer than the dial setting
- Frost or ice on the back wall
- Condensation or a wet shelf area
- Compressor running nonstop in a warm kitchen
The Café CCP06BP2PS1 is an ENERGY STAR beverage center that holds 126 cans or 14 bottles in 5.10 cubic feet. It is 23.75 in wide and has an adjustable temperature control, which suits a built-in spot under a counter or in a bar.
A beverage center is a small refrigeration system, so we start with the basics: door gasket seal, airflow around the condenser, and the evaporator fan. Frost on the back wall or a warm interior usually points to the airflow or the defrost side. Because these units are often built in, ventilation behind and below matters a lot.
We confirm the model and serial from the label before we order a part. You see the price in writing first, and our repair has a 30-day workmanship warranty.
Key features
- Café ENERGY STAR beverage center
- Room for 126 cans or 14 bottles
- 5.10 cu ft total capacity
- Adjustable temperature control; 23.75 in wide
Why is my beverage center not cold enough?
On units of this type, a dirty condenser, a poor door seal or a stalled fan are common. We check each on the CCP06BP2PS1 and tell you which one it is.
Does a built-in unit need ventilation?
Yes. Built-in coolers push heat out and need clear air. We check the space around the unit if it runs constantly. A few inches of clear space can make a big difference to compressor life.
Why is there frost inside?
Frost can mean poor airflow or a door that is not sealing. We inspect the gasket and the evaporator area. A thin coat of frost is not unusual, but thick frost means we should open the cabinet.
Book repair for your CCP06BP2PS1
Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.