Error code · Range

GE Range Codes F0, F1, F6 and F7: keypad panel group

Several GE, Profile and Café ranges and wall ovens with electronic oven controls use F0, F1, F6 and F7 as one group of codes. They usually point to the keypanel, the touch pad assembly on the…

Medium · inspection needed

Arrange a Repair (713) 547-5545

Code: F0, F1, F6, F7
Appliance: Range
Brand: GE
Warranty: 30-day workmanship

What F0, F1, F6, F7 means

Several GE, Profile and Café ranges and wall ovens with electronic oven controls use F0, F1, F6 and F7 as one group of codes. They usually point to the keypanel, the touch pad assembly on the front of the control. When one appears the display shows the F-code and the oven may stop responding to pad presses or refuse to heat. These codes are often cured only by replacing the keypanel itself, though a quick power interruption is worth trying first.

Common causes of F0, F1, F6, F7

Keypanel reading pad signals incorrectly
Ribbon connection between the keypanel and the control board
Moisture or heat damage at the front of the control
Control board that the keypanel reports to

✓ One safe check you can try

1. Switch the oven's circuit breaker or fuse off for a minute or two. 2. Restore the power. 3. Check whether the code has cleared and the pads respond. 4. If the code persists, stop using the oven and have it serviced. 5. Keep water and cleaner off the control panel in the meantime.

! Why to stop there

A code that survives a power interruption tells us the keypanel or its connection needs testing.
We check whether the keypanel or the board behind it is involved before any part is ordered.
Opening the control means working near line voltage, so it is left to us.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Range codes

Wi-Fi icon flashing / solidGE Smart Range Wi-Fi Icon Flashing or Solid: Setup Connection Status Cooktop Hot / Hot SurfaceGE Electric Range Hot Surface Indicator: Glass Cooktop Still Warm Control panel flashingGE Gas Range Control Panel Flashing After Lockout: Burner Knobs Left On Optimizing Cook TimeGE Range Message "Optimizing Cook Time": Voltage Check at Cycle Start SALE / Demo modeGE Range Display Shows SALE: Demo Mode From 120-Volt Power PROBE / LOGE Range Message "PROBE": Flashing or LO ERR + TURN SURFACE BURNERS OFFGE Café Range Message "TURN SURFACE BURNERS OFF": Clean Cycle Blocked ]GE Range Display "]": Clock Display Turned Off

F0, F1, F6, F7F0, F1, F6, F7 questions

Which of F0, F1, F6 and F7 do I have?

Read the display. Each shows its own letter and number, but on these ranges they are grouped because they point to the same area, the keypanel. We confirm which one by testing the control.

Will turning the breaker off for a minute fix it?

Sometimes. Removing power for a minute or two lets the control restart. If the code is still there after you restore power, the keypanel usually needs service.

Do you need to replace the whole control?

Often the keypanel is the part involved, not the whole control. We confirm that first and give you a written price before ordering anything. Our work carries a 30-day workmanship warranty.

Book a visit

Still seeing F0, F1, F6, F7?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 547-5545