Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent GE specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 547-5545 Arrange a Repair
Error code · Range

GE Profile Induction Range Message “PAn tESt”: Pan Compatibility Results

On GE Profile induction ranges with the Pan Compatibility Test (PHS700 family, 2021 and newer), such as the PHS700AYFS and PHS700AYBS, PAn tESt means the range is in test mode. You enter it by holding 7…

Low risk · DIY check OK
Arrange a Repair(713) 547-5545
Code
PAn tESt
Appliance
Range
Brand
GE
Warranty
30-day workmanship

What PAn tESt means

On GE Profile induction ranges with the Pan Compatibility Test (PHS700 family, 2021 and newer), such as the PHS700AYFS and PHS700AYBS, PAn tESt means the range is in test mode. You enter it by holding 7 and 2 for 3 seconds. The results are bESt for highly compatible, Good for compatible, FinE for compatible but another combination may be better, Poor for slightly compatible and bAd for not compatible.

Common causes of PAn tESt

  • Pan material not well suited to induction
  • Pan too small or warped
  • Pan placed off center
✓ One safe check you can try

1. For a Poor or bAd result, see Cookware for Induction Cooktops in your owner's manual. 2. Press Cancel to exit the test mode. 3. Try a flat-bottomed pan with a magnetic base. 4. Center the pan on the element and test again.

! Why to stop there
  • If a known good pan reads bAd, whether the element or its sensor reads wrong stays unknown
  • We test the element; a test result on an unsuitable pan is not a repair
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Range codes

Wi-Fi icon flashing / solidGE Smart Range Wi-Fi Icon Flashing or Solid: Setup Connection Status Cooktop Hot / Hot SurfaceGE Electric Range Hot Surface Indicator: Glass Cooktop Still Warm Control panel flashingGE Gas Range Control Panel Flashing After Lockout: Burner Knobs Left On Optimizing Cook TimeGE Range Message "Optimizing Cook Time": Voltage Check at Cycle Start SALE / Demo modeGE Range Display Shows SALE: Demo Mode From 120-Volt Power LOCK DOOR / DOOR LOCKINGGE Range Message "LOCK DOOR": Self-Clean Door Not Closed DOOR LOCKEDGE Range Message "DOOR LOCKED": Oven Still Hot HOTGE Profile Range Message "HOT": Steam Clean Will Not Start
PAn tEStPAn tESt questions
What does PAn tESt mean on my induction range?

The range is in Pan Compatibility Test mode, which rates how well your pan works on that element. You started it by holding 7 and 2 for 3 seconds.

What do the test results mean?

bESt is highly compatible, Good is compatible, FinE is compatible but another combination may do better, Poor is slightly compatible, and bAd is not compatible with the cooktop.

How do I leave the test mode?

Press Cancel. You can then cook normally, preferably with a pan that scored bESt or Good, which will heat faster and more evenly than one that scored Poor.

Book a visit

Still unsure about PAn tESt?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 547-5545