P4NM20AZOG
GE Profile P4NM20AZOG Opal Mini Repair
Most common issues on this model
- Push button and status light response
- Add Water light and reservoir level
- Ice production dropping below normal
- Scale in the water path
- Drainage tube leaks
The GE Profile P4NM20AZOG is an Opal Mini nugget ice maker. GE lists 36 lb of daily ice production, a mechanical push button, four lights for Defrosting, Clean, Add Water and Making Ice, and drainage tubes.
A countertop nugget machine this size gets steady use, so scale and low water are the usual first checks. We read the lights, then fill the reservoir and watch the machine start. If production is low, we descale and inspect the water path before we look at the ice-making parts. A push button that does not respond sends us to the button and the board behind it, and a wet counter sends us to the drainage tubes.
We copy the full model and serial from the label before ordering any part. The price is written first.
Key features
- GE Profile Opal Mini nugget ice maker, AZOG finish
- Listed at 8.6 in
- 36 lb daily ice production
- Mechanical push button and four status lights
- Drainage tubes included
Error codes this model can show
How much ice does the P4NM20AZOG make?
GE lists 36 lb of daily ice production. If yours is making much less, we descale the machine and check the water path and the ice-making parts.
The Add Water light stays on. What do you check?
We fill the reservoir, look at the level sensing and clear any scale around it. If the light stays on, we test the sensing parts.
Is the control electronic or mechanical?
GE lists a mechanical push button with four lights. If starting becomes unreliable, we test the button and its contact with the board behind it.
Book repair for your P4NM20AZOG
Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.