GE Profile Opal 2.0 Ultra Descale Light: 100-hour reminder
On the GE Profile Opal 2.0 Ultra nugget ice makers (XPIO13, XPIO23 and XPIO43 family), the Descale light turns on after 100 hours of ice making. It reminds you to remove mineral scale from the water…
- Code
- Descale light
- Appliance
- Opal Ice Maker
- Brand
- GE
- Warranty
- 30-day workmanship
What Descale light means
On the GE Profile Opal 2.0 Ultra nugget ice makers (XPIO13, XPIO23 and XPIO43 family), the Descale light turns on after 100 hours of ice making. It reminds you to remove mineral scale from the water path. Left alone, scale can reduce ice output and add strain to the auger. The light is a service reminder, not a sign that something has broken.
Common causes of Descale light
- 100 hours of ice making have passed
- Hard water leaving scale in the ice maker
1. Run the Descale cycle by holding Clean, following the manual. 2. Let the cycle finish. 3. Rinse as the manual describes. 4. Confirm the light goes off. Keep the area around the unit dry afterward and empty any rinse water as directed.
- If the light stays on after a full descale, the cycle or the counter did not complete.
- Heavy scale can need a repeat cycle.
- We descale, test and give a written price first.
Other Opal Ice Maker codes
Why is the Descale light on?
The unit has made ice for 100 hours. The light reminds you to descale. It is a counter, not a diagnosis. Follow the manual steps in order.
How do I descale it?
Hold the Clean button to start the Descale cycle and follow the manual. Let it finish before making ice again. The descale cycle takes some time, so plan for the unit to be out of service during it.
Does hard water matter?
Yes. Harder water leaves more scale, so descaling matters more. A softener or filter helps. Using filtered water helps slow the buildup of scale inside the machine.
Still unsure about Descale light?
A technician diagnoses it on site and gives you the price in writing before any work starts.