Error code · Opal Ice Maker

GE Profile UCC15 Clear Ice Machine Check Water Light: Low supply

Medium · inspection needed

Code: Check Water light flashing red
Appliance: Opal Ice Maker
Brand: GE
Warranty: 30-day workmanship

What Check Water light flashing red means

On the GE Profile 15-inch undercounter clear ice machine UCC15 (Gourmet Clear Ice, models such as UCC15NJII and UCC15NPRII), a flashing red Check Water light means the water supply is low. The control checks for water every 20 minutes. When water returns, the machine resets on its own and goes back to making clear ice, so no button press is needed.

Common causes of Check Water light flashing red

Supply valve closed or partly closed
Kinked supply line behind the machine
Low household water pressure
Inlet valve not passing water

✓ One safe check you can try

1. Open the shutoff valve fully. 2. Check the supply line for kinks. 3. Restore the water supply. 4. Wait; the control checks every 20 minutes and resets automatically when water returns. Close the cabinet door afterward and check later for ice.

! Why to stop there

If the supply is confirmed good and the light keeps flashing, the inlet valve or water sensing is the area we test.
We check line pressure first, then the valve and the sensing.
A written price comes first.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Opal Ice Maker codes

Sanitize lightGE Profile Opal 2.0 Ultra Sanitize Light: 25-hour reminder Filter light pulsing / blinkingGE Profile Opal 2.0 Filter Light Pulsing: Replace filter Blue ring but reservoir fullGE Profile Opal OPAL01 Blue Ring With a Full Reservoir Green ring blinkingGE Profile Opal OPAL01 Green Ring Blinking by Itself Descale lightGE Profile Opal 2.0 Ultra Descale Light: 100-hour reminder Check Water light flashing redGE Profile UNC15 Nugget Ice Machine Check Water Light Flashing Red All lights flashingGE Profile UNC15 Ice Machine All Lights Flashing: Auger motor Time to Clean lightGE Profile UNC15 Time to Clean Light: Descale reminder

Check Water light flashing redCheck Water light flashing red questions

Why is Check Water flashing red on my clear ice machine?

The water supply is low. The machine cannot make clear ice without enough water. Clear ice needs a steady supply, so the machine waits for water.

Do I need to restart it?

No. The control checks for water every 20 minutes and resets automatically once water returns. This saves you from pressing buttons; just fix the supply and wait.

What if the light stays on?

Make sure the valve is open and the line is not pinched. If it still flashes, the inlet valve needs testing. We also check for a clogged inlet.

Book a visit

Still seeing Check Water light flashing red?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 547-5545