Error code · Opal Ice Maker

GE Profile UNC15 Ice Machine All Lights Flashing: Auger motor

High · stop use, call now

Code: All lights flashing
Appliance: Opal Ice Maker
Brand: GE
Warranty: 30-day workmanship

What All lights flashing means

When every light flashes on the GE Profile 15-inch undercounter nugget ice machine UNC15 (UNC15NJII and UNC15NPRII), the auger motor is not working or is overloaded. The auger is the screw that moves and compresses ice. The machine stops making nuggets, and the whole panel flashes until the condition is dealt with, so you will see no ice production. It is a protective stop.

Common causes of All lights flashing

Auger motor overloaded by ice or scale buildup
Auger motor not turning
Mineral buildup because cleaning was overdue
Control not receiving a proper motor signal

✓ One safe check you can try

1. Press ON/OFF to reset the machine. 2. Wait for the lights to settle. 3. Check that the Time to Clean light is not on; if it is, clean the machine as instructed. 4. If the lights keep flashing after the reset, call us.

! Why to stop there

If the reset does not stop the flashing, the motor still cannot turn the auger.
We check for ice or scale binding the auger, then test the motor and its drive.
A written price comes first, and we explain whether cleaning or a part is needed.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Opal Ice Maker codes

Descale lightGE Profile Opal 2.0 Ultra Descale Light: 100-hour reminder Sanitize lightGE Profile Opal 2.0 Ultra Sanitize Light: 25-hour reminder Filter light pulsing / blinkingGE Profile Opal 2.0 Filter Light Pulsing: Replace filter Blue ring but reservoir fullGE Profile Opal OPAL01 Blue Ring With a Full Reservoir Green ring blinkingGE Profile Opal OPAL01 Green Ring Blinking by Itself Time to Clean lightGE Profile UNC15 Time to Clean Light: Descale reminder Check Water light flashing redGE Profile UCC15 Clear Ice Machine Check Water Light: Low supply Time to Clean lightGE Profile UCC15 Clear Ice Machine Time to Clean Light

All lights flashingAll lights flashing questions

Why are all lights flashing on my UNC15?

The auger motor is not working or is overloaded. The machine stops to protect itself. It protects the motor and the auger from damage, so the machine stops making ice.

How do I reset it?

Press ON/OFF. If that does not reset the motor and the lights continue to flash, the machine needs service. If this is the second time it happened, mention that to us.

Could scale cause this?

Buildup can make the auger work harder, so keep up with cleaning. We check for it when we test the motor. A cleaning check is a good first step.

Book a visit

Still seeing All lights flashing?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 547-5545