Error code · Dryer

GE Profile Dryer Vent Health Result 01, 02 or 03: How Restricted Is the Vent

On GE Profile top-load dryers PTD60 and PTD90 (2020 and newer), the Vent Health test is started by holding Time and Level for 3 seconds, closing the door and pressing Start. The result shows as a…

Low risk · DIY check OK

Arrange a Repair (713) 547-5545

Code: 01 / 02 / 03
Appliance: Dryer
Brand: GE
Warranty: 30-day workmanship

What 01 / 02 / 03 means

On GE Profile top-load dryers PTD60 and PTD90 (2020 and newer), the Vent Health test is started by holding Time and Level for 3 seconds, closing the door and pressing Start. The result shows as a number. 01 means the house vent is clean and normal. 02 means the vent may need attention and its condition may affect performance. 03 means Vent Blocked, so the house vent is highly restricted and affecting performance. On some models the test runs only through the SmartHQ app. Houston homes with long attic runs often land on 02.

Common causes of 01 / 02 / 03

Lint buildup in the house duct
Long vent run or many bends
Outside damper not opening fully

✓ One safe check you can try

1. Note the number: 01, 02 or 03. 2. On 02 or 03, clean the lint filter and the vent from the dryer to the outside hood. 3. Make any needed adjustments to the house vent, such as straightening a kinked duct. 4. Run the Vent Health test again with an empty drum.

! Why to stop there

A 03 that stays after cleaning means we check the whole run for hidden crushed sections, which are common in attics.
If the house vent is fine and the dryer still runs poorly, we test the blower and heat path.
The price is given in writing before work starts, with a 30-day workmanship warranty.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Dryer codes

Check VentGE Dryer Check Vent Light: Airflow Is Reduced, Vent May Be Restricted Vent BlockedGE Profile Dryer Vent Blocked Light: Restricted Airflow Warning 00GE Profile Dryer Vent Health Result 00: Test Invalid, Room Too Warm Clean Lint FilterGE Dryer Clean Lint Filter Light: Reminder Before the Next Load Empty TankGE Ventless Dryer Empty Tank Light: Water Tank Is Full and the Cycle Is Paused Tank Low / EmptyGE Profile Dryer Fabric Refresh Tank Low or Empty: Refill Before the Next Cycle 1 / 2GE Dryer Display "1" or "2": Choose Electric or Gas Setting

01 / 02 / 0301 / 02 / 03 questions

What do 01, 02 and 03 mean after the Vent Health test?

01 means the vent is clean and normal. 02 means it may need attention. 03 means it is highly restricted and affecting performance. Clean and adjust the vent for 02 or 03.

How do I start the test?

Hold Time and Level for three seconds, close the door and press Start. On some models the test is available only in the SmartHQ app instead of the control panel.

Does 02 mean I must call someone?

Not necessarily. Cleaning the lint filter and the duct often brings it back to 01. If it stays at 02 or 03 after cleaning, we look at the vent run itself.

Book a visit

Still unsure about 01 / 02 / 03?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 547-5545