Error code · Dishwasher

GE Electronic Dishwasher Code FTD / F56: Failure to Drain

Medium · inspection needed

Code: FTD / F56
Appliance: Dishwasher
Brand: GE
Warranty: 30-day workmanship

What FTD / F56 means

On GE electronic-control dishwashers that show C-codes, such as the GDT530PSDSS, FTD and F56 are two spellings of the same message: failure to drain. The control tried to empty the tub and the water did not leave, so it stopped the cycle. F56 is the only F-number in this family. You will see standing water at the bottom of the tub, a code on the display and dishes that were left half washed. The problem sits somewhere on the way from the tub to the sink drain.

Common causes of FTD / F56

Drain hose kinked or crushed behind the unit
Air gap or disposer inlet blocked
Filter and sump holding food debris
Drain pump not moving water

✓ One safe check you can try

1. Check the drain hose for kinks and make sure it is not crushed. 2. Clean the air gap at the sink. 3. Run the garbage disposer so its inlet is open. 4. Clear the filter at the bottom of the tub. 5. Start a short cycle and watch the tub. If water remains, stop using the dishwasher.

! Why to stop there

Clear hose and air gap leave the pump itself untested.
We time the drain and check pump movement before touching the pump.
You get a written price before we start.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Dishwasher codes

Start light flashingGE Dishwasher Start Light Flashing: Door Opened or Cycle Interrupted Low Rinse AidGE Dishwasher Low Rinse Aid Indicator: Refill the Dispenser Smart Assist light redGE Dishwasher Smart Assist Light Red: A Potential Problem Was Detected Smart Assist light yellowGE Dishwasher Smart Assist Light Yellow: A Notification Is Waiting in SmartHQ C2GE Dishwasher Code C2: Total Draining Time Beyond 7 Minutes C3GE Electronic Dishwasher Code C3: Tub Will Not Drain at All C4GE Dishwasher Code C4: Tub Filled Twice After a Power Failure C5GE Dishwasher Code C5: Pump-Out Ran for Too Short a Time

FTD / F56FTD / F56 questions

What do FTD and F56 mean on a GE dishwasher?

Both say the dishwasher failed to drain. They are the same message under two spellings, so the same drain-path checks apply whichever one your panel shows.

What should I check first for a drain failure?

Look at the drain hose for kinks, clean the air gap, and run the disposer. These are the common restrictions and you can check them without opening anything.

Is it safe to leave water in the tub?

For a short time, yes, but dirty water can smell and attract pests. Do not keep starting cycles on a full tub, and book a visit if the checks do not help.

Book a visit

Still seeing FTD / F56?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 547-5545