Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent GE specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 547-5545 Arrange a Repair
Error code · Dishwasher

GE Dishwasher Message LEAK DETECTED: Cycle Canceled by the Control

On GE dishwashers with leak detection, such as the GDT530PSDSS, the message LEAK DETECTED means the control sensed a possible leak and canceled the cycle. The detection sits low in the cabinet, so water in the…

High · stop use, call now
Arrange a Repair(713) 547-5545
Code
LEAK DETECTED
Appliance
Dishwasher
Brand
GE
Warranty
30-day workmanship

What LEAK DETECTED means

On GE dishwashers with leak detection, such as the GDT530PSDSS, the message LEAK DETECTED means the control sensed a possible leak and canceled the cycle. The detection sits low in the cabinet, so water in the base pan can trigger it even when the door area looks dry. You will see the message, the cycle will not run and you may notice dampness at the floor. Treat this as a water-damage risk until the source is found.

Common causes of LEAK DETECTED

  • Water collecting in the base pan from a hose or fitting
  • Door gasket or tub seal weeping
  • Overflow from too much detergent or suds
  • Sensor wet from condensation or a spill
✓ One safe check you can try

1. Turn off the water supply valve to the dishwasher. 2. Unplug the dishwasher or turn off its breaker. 3. Look around and under the unit for water and dry up what you find. 4. Do not run the dishwasher again until a technician has checked it.

! Why to stop there
  • A dry floor does not prove the base pan is dry, because the sensor can sit inside the cabinet.
  • We trace the water to its source and test the hoses, seals and pump.
  • We tell you what we find before work, and the written price comes first.
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Dishwasher codes

Smart Assist light redGE Dishwasher Smart Assist Light Red: A Potential Problem Was Detected Smart Assist light yellowGE Dishwasher Smart Assist Light Yellow: A Notification Is Waiting in SmartHQ Start light flashingGE Dishwasher Start Light Flashing: Door Opened or Cycle Interrupted Low Rinse AidGE Dishwasher Low Rinse Aid Indicator: Refill the Dispenser PrSGE Electronic Dishwasher Code PrS: Sensor for Water Pressure Sends Invalid Signal 999GE Dishwasher Code 999: Possible Leak, or a Control Reset C1GE Electronic Dishwasher Code C1: Drain Step Ran Past 2 Minutes C2GE Dishwasher Code C2: Total Draining Time Beyond 7 Minutes
LEAK DETECTEDLEAK DETECTED questions
What does LEAK DETECTED mean on a GE dishwasher?

The control sensed possible water where it should not be and canceled the cycle. It is a protective stop, so the source of the water still has to be found.

Is it safe to keep using the dishwasher?

No. Shut off the water supply, turn the power off and keep it off. Running it with a real leak can ruin cabinets and flooring.

Could suds trigger LEAK DETECTED?

Excess suds can push water into the base pan and set the sensor off. Use only dishwasher detergent, but still have the unit checked if the message repeats.

Book a visit

Still seeing LEAK DETECTED?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 547-5545