Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent GE specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 547-5545 Arrange a Repair
Error code · Range

GE Range Code FD: probe or receptacle

On GE, Profile and Café ranges and wall ovens with electronic oven controls, FD points to the temperature probe or the receptacle it plugs into. The probe is the meat thermometer lead that connects inside the…

Medium · inspection needed
Arrange a Repair(713) 547-5545
Code
FD
Appliance
Range
Brand
GE
Warranty
30-day workmanship

What FD means

On GE, Profile and Café ranges and wall ovens with electronic oven controls, FD points to the temperature probe or the receptacle it plugs into. The probe is the meat thermometer lead that connects inside the oven. When the control reads an unusual signal from that jack it shows FD, and the oven may stop a probe-based cook or refuse to continue baking until the code is cleared.

Common causes of FD

  • Probe jack inside the oven reading an incorrect signal
  • Probe itself with a damaged lead
  • Connection between the receptacle and the control
✓ One safe check you can try

1. Remove the meat probe from the oven and the receptacle. 2. Let the oven cool. 3. Switch the circuit breaker or fuse off for a minute or two, then restore power. 4. Try a normal bake without the probe. 5. If the code persists, book a visit for the oven.

! Why to stop there
  • The probe and the jack both wear, so we test them separately.
  • A reading that is only wrong when hot needs a test with the oven at temperature.
  • Replacing the probe will not fix a bad receptacle, so we confirm which one first.
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Range codes

Wi-Fi icon flashing / solidGE Smart Range Wi-Fi Icon Flashing or Solid: Setup Connection Status Cooktop Hot / Hot SurfaceGE Electric Range Hot Surface Indicator: Glass Cooktop Still Warm Control panel flashingGE Gas Range Control Panel Flashing After Lockout: Burner Knobs Left On Optimizing Cook TimeGE Range Message "Optimizing Cook Time": Voltage Check at Cycle Start SALE / Demo modeGE Range Display Shows SALE: Demo Mode From 120-Volt Power PROBE / LOGE Range Message "PROBE": Flashing or LO ERR + TURN SURFACE BURNERS OFFGE Café Range Message "TURN SURFACE BURNERS OFF": Clean Cycle Blocked ]GE Range Display "]": Clock Display Turned Off
FDFD questions
Do I have to use the meat probe at all?

No. If you do not cook with it, take the probe out of the oven and leave the jack empty. If FD still appears with no probe plugged in, the receptacle or the control may be involved and the oven needs a look from us.

My probe lead looks worn. Is that the cause?

It might be. A damaged lead can send a wrong signal, but a worn jack inside the oven can do exactly the same. We test both separately before replacing anything, so you are not paying for the wrong part.

Will switching the breaker off help clear FD?

It is worth one try. Removing power for a minute or two lets the control restart and re-read the jack. If FD comes straight back after you restore power, the part involved has to be tested by us.

Book a visit

Still seeing FD?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 547-5545