P4INAASSTSS
GE Profile P4INAASSTSS Opal 1.0 Nugget Ice Maker Repair
Most common issues on this model
- Water reservoir fill and the Add Water light
- Clean light and descaling needs
- Nugget production slowing or stopping
- Drainage tube routing and leaks
- Bin fullness sensing
The GE Profile P4INAASSTSS is an Opal 1.0 nugget ice maker. GE lists a 3 lb storage bin, an electronic control with four lights for Defrosting, Clean, Add Water and Making Ice, and a 13.5 in drainage tube.
The four lights give us a good starting point. If the Add Water light stays on with a full reservoir, we look at the water level sensing. A Clean light that keeps returning points to scale, so we descale and test again before we blame a part. When production slows or stops, we check the water path, the ice-making parts and the bin sensing. Any drip from the drainage tube is traced along its full length.
We read the model and serial from the label before ordering. You get a written price first, and a 30-day workmanship warranty on our work.
Key features
- GE Profile Opal 1.0 nugget ice maker
- Listed at 9.67 in
- 3 lb storage bin
- Four status lights: Defrosting, Clean, Add Water and Making Ice
- 13.5 in drainage tube
Error codes this model can show
What do the four lights mean on the P4INAASSTSS?
GE lists Defrosting, Clean, Add Water and Making Ice. They show the machine state, so we read them first, then test the water level sensing or descale as needed.
The Clean light is on. Is the ice maker broken?
Not necessarily. A Clean light often means scale needs removing. We run a descaling cycle, then check that the light clears and that ice production returns.
How does the drainage tube affect repair?
GE lists a 13.5 in drainage tube. A kinked or loose tube can leak or hold water back, so we check its routing and connections.
Book repair for your P4INAASSTSS
Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.