Model library · GE Opal Ice Maker

XPIO43SCSS

GE Profile XPIO43SCSS Ice Maker and Filters Repair

Most common issues on this model

Water feeding from the side tank into the ice-making section
Drainage tube connections and leaks under the unit
Filter fit and flow after a cartridge change
Scale buildup slowing nugget production

The XPIO43SCSS is listed as a GE Profile Opal 2.0 nugget ice maker with a side tank and four Opal filters. It is electric, about 13.43 in wide, rated at 38 lb of ice per day, and it comes with drainage tubes and electronic controls.

Because this version includes both a side tank and drainage tubes, we pay attention to the plumbing around the machine as much as the ice-making section. We check that water moves from the tank, that the drain tubes are seated and not kinked, and that a newly installed filter is not restricting flow. Scale is the other usual suspect on models of this type, especially with hard tap water.

Typical calls describe slow ice, a machine that stops mid-cycle, or water under the unit. We read the model and serial from the label before ordering parts, give you a written price first, and back the work with a 30-day workmanship warranty.

Key features

GE Profile Opal 2.0 nugget ice maker with side tank
Includes 4 Opal filters
Daily ice production of 38 lb
Drainage tubes included, electronic controls

→Codes

Error codes this model can show

Descale lightGE Profile Opal 2.0 Ultra Descale Light: 100-hour reminder Sanitize lightGE Profile Opal 2.0 Ultra Sanitize Light: 25-hour reminder Filter light pulsing / blinkingGE Profile Opal 2.0 Filter Light Pulsing: Replace filter Blue ring but reservoir fullGE Profile Opal OPAL01 Blue Ring With a Full Reservoir Green ring blinkingGE Profile Opal OPAL01 Green Ring Blinking by Itself DefrostingGE Profile Opal 2.0 Defrosting Message: Frozen auger rinse Check Water light flashing redGE Profile UNC15 Nugget Ice Machine Check Water Light Flashing Red All lights flashingGE Profile UNC15 Ice Machine All Lights Flashing: Auger motor

XPIO43SCSSXPIO43SCSS questions

My Opal machine leaks near the drain. Is that a repair or a hose issue?

With this model's drainage tubes, a loose or kinked connection is a common first finding. We check the tube seating and the tank joint before looking at anything inside the machine.

Can a new filter affect ice production?

It can. If a filter is seated badly or restricts flow, the water path may starve the ice-making section. This model ships with four Opal filters, so we check fit and flow after a change.

What is different about the XPIO43SCSS?

It is the side-tank Opal 2.0 with extra filters and drainage tubes included, 13.43 in wide and rated at 38 lb of ice per day. We verify your exact version from the label before ordering parts.

Book a visit

Book repair for your XPIO43SCSS

Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.

(713) 547-5545