Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent GE specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 547-5545 Arrange a Repair
Error code · Refrigerator

GE Refrigerator Filter Status LED Red: Replace the filter

On GE and GE Profile refrigerators with the XWFE RFID water filter and a Filter Status LED (side-by-side GSS25, GSE25 and PSE25, and bottom-freezer and French-door GNE, GBE and GFE, 2018 and newer), a red Filter…

Low risk · DIY check OK
Arrange a Repair(713) 547-5545
Code
Filter Status LED red
Appliance
Refrigerator
Brand
GE
Warranty
30-day workmanship

What Filter Status LED red means

On GE and GE Profile refrigerators with the XWFE RFID water filter and a Filter Status LED (side-by-side GSS25, GSE25 and PSE25, and bottom-freezer and French-door GNE, GBE and GFE, 2018 and newer), a red Filter Status LED means the filter has expired, or on bottom-freezer models that it is reaching the expired state. A steady red is a replacement reminder. A flashing red is a different message, covered separately.

Common causes of Filter Status LED red

  • Filter has expired
  • Remaining filter life at 0%
  • New filter not yet detected after a change
✓ One safe check you can try

1. Press Filter Status to show the remaining life; 0% means replace. 2. Install a new XWFE filter. 3. After the new filter is detected the LED flashes 3 times and then stays off. 4. If it does not, reseat the filter.

! Why to stop there
  • If the LED stays red after a new filter, the refrigerator is not recognizing it.
  • We check the filter seat, the label reader and the connection.
  • You get a written price before any work.
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Refrigerator codes

Not FoundGE Refrigerator AUTOFILL Not Found: Container not recognized Hi AL / Lo ALGE Refrigerator Hi AL and Lo AL: High-altitude hot water setting Replace Water FilterGE Profile PVD28 Replace Water Filter: Change soon Water Filter ExpiredGE Profile PVD28 Water Filter Expired: Confirm change item not foundGE Profile PVD28 Item Not Found: Barcode scanner message Water filter installed incorrectlyCafe CYE22T Water Filter Installed Incorrectly or Leak Present Icemaker green light flashingGE Refrigerator Icemaker Green Light Flashing: Harvest not completed LEAKGE Refrigerator LEAK Message: Filter leak detected
Filter Status LED redFilter Status LED red questions
Why is my Filter Status LED red?

The filter has expired, or on bottom-freezer models it is reaching expiry. Press Filter Status to see the remaining life. Use the pad to confirm the percentage.

How will I know the new filter is accepted?

After a new filter is detected, the LED flashes 3 times and then stays off. Most owners see the LED go off once the new filter is read.

It stays red after replacing. Why?

The filter may not be fully seated, or the reader is not detecting it. Reseat it, and if red remains, call us. Reseating takes seconds.

Book a visit

Still unsure about Filter Status LED red?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 547-5545