Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent GE specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 547-5545 Arrange a Repair
Error code · Room Air Conditioner

GE Zoneline AZ95 Code 2: Outside fan stalling under command

Code 2 on a current GE Zoneline AZ95 single-package vertical unit (AZ95E or AZ95H, for example the AZ95H09EAC) says the outside fan motor is not moving at its commanded speed. The control waits 90 seconds, flags…

Medium · inspection needed
Arrange a Repair(713) 547-5545
Code
2
Appliance
Room Air Conditioner
Brand
GE
Warranty
30-day workmanship

What 2 means

Code 2 on a current GE Zoneline AZ95 single-package vertical unit (AZ95E or AZ95H, for example the AZ95H09EAC) says the outside fan motor is not moving at its commanded speed. The control waits 90 seconds, flags the error, and clears it after 10 minutes. With code 2 active the heat pump and cooling stay off, leaving only resistance heat and the inside fan. It should not be confused with code 2 on AZ90 and AZ91 units.

Common causes of 2

  • Outside fan motor not reaching speed
  • Outdoor grille or air path blocked
  • Motor wiring or drive signal to the outside fan
✓ One safe check you can try

1. Hold MODE, press AUX and read the display to see the stored entries; -- means none. 2. AUX erases what is stored, while any other button exits with the entries intact. 3. Look at the outdoor grille from outside, if you can reach it safely, for leaves, debris or a covering. 4. Switch to heat or fan and let the room settle. 5. Leave the chassis closed and tell your property manager if code 2 returns.

! Why to stop there
  • A blocked outside grille and a stalled motor can both stop the outside fan from reaching speed.
  • We check the outdoor air path, then test the fan drive.
  • The price is in writing before any work, and a 30-day workmanship warranty applies.
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Room Air Conditioner codes

Temperature display flashingGE Zoneline AZ41 AZ61 Temperature Display Flashing: Unit Alert 17GE Zoneline AZ95 Code 17: Outlet thermistor open or shorted 11GE Zoneline AZ90 Code 11: Wall thermostat will not talk to the unit Cool light flashingGE Window AC Cool Light Flashing: Evaporator Coils Too Cold 18, 19GE Zoneline AZ95 Codes 18 and 19: Outgoing air overheating 13GE Zoneline AZ90 Code 13: High Pressure Limit Switch Open Temperature display flashingGE Zoneline AZ45 AZ65 Temperature Display Flashing: Control Lockout Active 25GE Zoneline AZ95 Code 25: Defrost lockout for 4.5 days
22 questions
Can I still get warm air with code 2?

Yes, resistance heat and the inside fan keep working. You will not get heat pump heating or cooling until the outside fan error is dealt with.

Why would the outside fan struggle?

Debris on the exterior grille, a coastal or dusty location, or motor wear can all keep it from reaching speed. We look at the airflow first.

How is this different from the older AZ90 code 2?

The AZ90 and AZ91 code 2 reports a supply voltage problem. On an AZ95 it is about the outside fan, so the model generation matters.

Book a visit

Still seeing 2?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 547-5545