Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent GE specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 547-5545 Arrange a Repair
Error code · Dehumidifier

GE Dehumidifier Code P2: water bucket is full

On GE digital-display dehumidifiers from the 2008 to 2010 generation, including AHM30, AHH40 and AHM65 series units, P2 means the water bucket is full. The unit stops removing moisture until the water is emptied and the…

Low risk · DIY check OK
Arrange a Repair(713) 547-5545
Code
P2
Appliance
Dehumidifier
Brand
GE
Warranty
30-day workmanship

What P2 means

On GE digital-display dehumidifiers from the 2008 to 2010 generation, including AHM30, AHH40 and AHM65 series units, P2 means the water bucket is full. The unit stops removing moisture until the water is emptied and the bucket is seated back in place. The display shows P2 and the unit will not restart its cycle while the bucket condition remains. It is a simple maintenance alert, not a failure.

Common causes of P2

  • Bucket full of collected water
  • Bucket not seated fully after emptying
  • Float or bucket switch not registering the bucket position
✓ One safe check you can try

1. Slide the bucket out carefully with both hands so water does not spill. 2. Empty it into a sink or drain. 3. Dry the bucket rim and slide it fully back into place until it seats. 4. Wait for the unit to resume. 5. If P2 stays on with an empty bucket, remove and reseat the bucket once more and check the water for debris near the float.

! Why to stop there
  • If P2 persists with an empty, seated bucket, the float or bucket switch may not be signaling correctly.
  • We check how the unit reads the bucket position and the float movement.
  • You see a written price before any repair, and our work has a 30-day workmanship warranty.
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Dehumidifier codes

E1GE Dehumidifier Code E1: Humidity Sensor Error E2GE Dehumidifier Code E2: Temperature Sensor Error P1GE Dehumidifier Code P1: defrost cycle running P1GE 50-Pint Pump Dehumidifier Code P1: water level sensor trouble Clean the FilterGE Dehumidifier Clean the Filter Light: what it means Bucket Full / EmptyGE Dehumidifier Bucket Full Light Flashing: why the unit stops Water Full light / E0GE Dehumidifier Water Full Light and 10-Second Beep: Bucket Full or E0 Pump 88GE Dehumidifier Code 88: Waiting for You to Set Humidity
P2P2 questions
Why does P2 appear when the bucket looks empty?

The unit may not detect the bucket as seated, or the float may be stuck. Reseating the bucket firmly is the first thing to try.

Can I connect a hose to avoid emptying the bucket?

Many GE dehumidifiers have a continuous drain option, but only if the model is built for it. Check your model for a drain connection before attaching a hose.

Does P2 mean the unit is leaking?

No. P2 is about the bucket being full, not a leak. If you do see water on the floor, check the bucket seating and the drain hose connection, if one is used.

Book a visit

Still unsure about P2?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 547-5545