Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent GE specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 547-5545 Arrange a Repair
Error code · Washer

GE UltraFresh Code Fault 6 Critical Flood Level: water nearing overflow

On GE UltraFresh front-load washers in the GFW850 series, Fault 6 Critical Flood Level by Pressure means the control saw extended pressure readings that indicate water nearing the overflow level. The washer treats this as an…

High · stop use, call now
Arrange a Repair(713) 547-5545
Code
Fault 6 Critical Flood Level by Pressure
Appliance
Washer
Brand
GE
Warranty
30-day workmanship

What Fault 6 Critical Flood Level by Pressure means

On GE UltraFresh front-load washers in the GFW850 series, Fault 6 Critical Flood Level by Pressure means the control saw extended pressure readings that indicate water nearing the overflow level. The washer treats this as an urgent condition, so it stops the fill. You may see water higher than normal in the drum or the cycle halting soon after starting. Please act promptly.

Common causes of Fault 6 Critical Flood Level by Pressure

  • Water inlet valve letting water through when it should be closed
  • Pressure sensor reading higher than actual water level
  • Drain not clearing water as the washer fills
  • Control not shutting off the fill
✓ One safe check you can try

1. Turn off the water supply valves behind the washer. 2. Unplug the washer only if you can reach the plug safely and the floor around it is dry. 3. Do not run another cycle. 4. Call us so we can inspect before it is used again.

! Why to stop there
  • High water can come from the fill side or the drain side, and the sensor reading alone cannot tell us which.
  • We test the inlet valve, the sensor line and the drain pump.
  • If water has reached the floor, keep the washer unplugged until it is inspected.
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Washer codes

70GE UltraFresh Washer Code 70: Inverter Start-Up Repeats 78GE UltraFresh Washer Code 78: Board Software Mismatch 85GE UltraFresh Washer Code 85: Voltage Out of Range Door / doorGE UltraFresh Washer Message "Door": Open the Door Before the Next Cycle LidGE Top-Load Washer Message "Lid": Open and Close the Lid to Continue Lid Locked light flashingGE Top-Load Washer Lid Locked Light Flashing: Three Cycles, No Lid Opened Fill light blinkingGE Top-Load Washer Fill Light Blinking: Two Blinks for No Water, Three for Open Lid Wash and Rinse lights blinkingGE Spacemaker Washer Wash and Rinse Lights Blinking: Water Not Entering
Fault 6 Critical Flood Level by PressureFault 6 Critical Flood Level by Pressure questions
Is Fault 6 serious?

Yes. It is a flood-level warning, which means water is getting close to the overflow level. Shut off the water supply and call us before you run another cycle in this washer.

What should I do right now?

Close the water supply valves behind the washer and keep it off. If water has reached the floor, mop it up carefully and keep your hands away from wet outlets until the area is dry.

Will you check for leaks as well?

Yes. We inspect the inlet valves, hoses and the drain path, and test the pressure sensor. You get a written price before work begins, and our repairs carry a 30-day workmanship warranty.

Book a visit

Still seeing Fault 6 Critical Flood Level by Pressure?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 547-5545