Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent GE specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 547-5545 Arrange a Repair
Error code · Dehumidifier

GE 70-Pint Dehumidifier Code E01: Pump Is Not Moving the Water

On GE 70-pint dehumidifiers with a built-in pump, E01 shows when Pump Out Mode is switched on but water is not being pumped out. In this mode the unit sends collected water through a hose instead…

Medium · inspection needed
Arrange a Repair(713) 547-5545
Code
E01
Appliance
Dehumidifier
Brand
GE
Warranty
30-day workmanship

What E01 means

On GE 70-pint dehumidifiers with a built-in pump, E01 shows when Pump Out Mode is switched on but water is not being pumped out. In this mode the unit sends collected water through a hose instead of filling the bucket. When the pump cannot move the water, the control stops the cycle and shows the code. You will notice the machine has stopped removing moisture and the bucket may fill or the hose may stay dry. Some listings write the code as E0 or E01.

Common causes of E01

  • Pump hose kinked, blocked or routed uphill beyond the pump's reach
  • Bucket not fully seated so the pump cannot draw from it
  • Pump or its float sensing a condition it cannot clear
  • Debris or mineral buildup in the pump path
✓ One safe check you can try

1. Unplug the dehumidifier. 2. Check the pump hose for kinks, clogs and a clear exit. 3. Remove the bucket and seat it firmly again. 4. Empty any water left in the bucket. 5. Plug the unit back in and restart Pump Out Mode. If E01 returns, switch to bucket draining and arrange a visit.

! Why to stop there
  • A clear hose and seated bucket rule out the simple causes, but not the pump itself.
  • We test whether the pump runs and moves water before suggesting any repair.
  • Pump repair on a dehumidifier is sometimes not worth the cost, and we say so up front.
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Dehumidifier codes

E1GE Dehumidifier Code E1: Humidity Sensor Error E2GE Dehumidifier Code E2: Temperature Sensor Error P1GE Dehumidifier Code P1: defrost cycle running P2GE Dehumidifier Code P2: water bucket is full P1GE 50-Pint Pump Dehumidifier Code P1: water level sensor trouble Clean the FilterGE Dehumidifier Clean the Filter Light: what it means Bucket Full / EmptyGE Dehumidifier Bucket Full Light Flashing: why the unit stops Water Full light / E0GE Dehumidifier Water Full Light and 10-Second Beep: Bucket Full or E0 Pump
E01E01 questions
What does E01 mean on a 70-pint GE dehumidifier?

Pump Out Mode is on, but the built-in pump is not moving water out. The control stops the cycle and displays E01 until the water path is clear.

Can I keep using the dehumidifier with E01?

You can turn off Pump Out Mode and empty the bucket by hand. That avoids the pump, but the code will keep returning if you switch Pump Out Mode on again.

Is E01 the same as P1?

They describe the same condition on different models. E01 is for the 70-pint units with a built-in pump, while P1 appears on the 50-pint models.

Book a visit

Still seeing E01?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 547-5545