Error code · Opal Ice Maker

GE Profile Opal OPAL01 Blue Ring With a Full Reservoir

Medium · inspection needed

Code: Blue ring but reservoir full
Appliance: Opal Ice Maker
Brand: GE
Warranty: 30-day workmanship

What Blue ring but reservoir full means

On the first-generation GE Profile Opal OPAL01 (OPAL01GEPKT, OPAL01GENSS and OPAL01GENKT), the round button has a display ring. Blue normally means the unit needs water. If the ring is blue while the reservoir is full, the ice maker is not working properly: it cannot move or sense the water it has, so ice stops even though water is in the tank.

Common causes of Blue ring but reservoir full

Water not being pumped to the ice-making path
Water level sensing not reading the full tank
Mineral buildup affecting the pump or sensor

✓ One safe check you can try

1. Put the Opal in Cleaning mode with the rear switch. 2. Press Power and run it for 3 minutes. 3. Watch whether water pumps and the ring changes. 4. If water does not pump or blue persists, contact Opal support or call us.

! Why to stop there

If the Cleaning mode does not move water, the pump or the sensor is the area we test.
We check water movement, the sensor and scale.
We give a written price before work.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Opal Ice Maker codes

Descale lightGE Profile Opal 2.0 Ultra Descale Light: 100-hour reminder Sanitize lightGE Profile Opal 2.0 Ultra Sanitize Light: 25-hour reminder Filter light pulsing / blinkingGE Profile Opal 2.0 Filter Light Pulsing: Replace filter Green ring blinkingGE Profile Opal OPAL01 Green Ring Blinking by Itself Check Water light flashing redGE Profile UNC15 Nugget Ice Machine Check Water Light Flashing Red All lights flashingGE Profile UNC15 Ice Machine All Lights Flashing: Auger motor Time to Clean lightGE Profile UNC15 Time to Clean Light: Descale reminder Check Water light flashing redGE Profile UCC15 Clear Ice Machine Check Water Light: Low supply

Blue ring but reservoir fullBlue ring but reservoir full questions

Why is the ring blue when the tank is full?

Blue normally means add water. With a full reservoir, it means the ice maker is not working properly and cannot use the water it has.

What can I try?

Switch to Cleaning mode with the rear switch, press Power and run it for 3 minutes. If water does not pump, stop there. Make sure the rear switch goes back to its normal position afterward.

Is it the pump?

Possibly, or the sensor. We test both before we name a part. We would also look for scale around the pump, since that can cause the same behavior in these units.

Book a visit

Still seeing Blue ring but reservoir full?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 547-5545