Error code · Washer

GE UltraFresh Washer Code 17: Dry Load Sense Timeout

Low risk · DIY check OK

Code: 17
Appliance: Washer
Brand: GE
Warranty: 30-day workmanship

What 17 means

On GE UltraFresh front-load washers in the GFW510, GFW550, GFW650 and GFW850 series, code 17 records that the drum did not reach its target speed within the time allowed during the dry-load weighing step, so the washer skipped ahead to the next part of the cycle. The control can log it when a cycle starts with already-wet clothes. Unless the display shows it on your model, it is found by a technician reading the stored error history. You may see slightly longer or odd-sounding spin-up at the start.

Common causes of 17

Load that was wet or very heavy when the cycle began
Drum turning with extra drag
Motor drive or speed feedback
Out-of-balance load at the start

✓ One safe check you can try

1. Start the next cycle with dry clothes and a load that is not packed tight. 2. Spread items evenly so one heavy piece is not wrapped around the others. 3. Make sure the washer sits level and does not rock when you push on a top corner.

! Why to stop there

If the code returns with a normal, dry, even load, the cause is probably not the clothes
We check that the drum turns freely and that the drive reaches speed
Any repair is quoted in writing first and carries a 30-day workmanship warranty

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Washer codes

70GE UltraFresh Washer Code 70: Inverter Start-Up Repeats 78GE UltraFresh Washer Code 78: Board Software Mismatch 85GE UltraFresh Washer Code 85: Voltage Out of Range Door / doorGE UltraFresh Washer Message "Door": Open the Door Before the Next Cycle LidGE Top-Load Washer Message "Lid": Open and Close the Lid to Continue Lid Locked light flashingGE Top-Load Washer Lid Locked Light Flashing: Three Cycles, No Lid Opened Fill light blinkingGE Top-Load Washer Fill Light Blinking: Two Blinks for No Water, Three for Open Lid Wash and Rinse lights blinkingGE Spacemaker Washer Wash and Rinse Lights Blinking: Water Not Entering

1717 questions

Did wet clothes cause code 17?

They can. If a cycle starts with soaked laundry, the weighing step may not reach target speed in time. Try a dry, evenly spread load before assuming a repair is needed.

Is code 17 harmful?

By itself it only means the washer moved on after the timeout. It is a note for the technician, not a shutdown, but repeats are worth checking.

Does code 17 affect the wash?

Mostly it changes how the washer weighs the load at the start. If it moves on early, the rest of the cycle usually still runs, though results can differ.

Book a visit

Still unsure about 17?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 547-5545