Error code · Washer

GE Top-Load Washer Lid Locked Light Flashing: Three Cycles, No Lid Opened

Low risk · DIY check OK

Code: Lid Locked light flashing
Appliance: Washer
Brand: GE
Warranty: 30-day workmanship

What Lid Locked light flashing means

On GE top-load washers without a text display (the GTW335, GTW465, GTW500 and GTW525 from 2019 on) and on the GUD24, GUD27 and GUV27 unitized washer and dryer, a flashing Lid Locked or Unlocked light is the quiet version of the Lid message. It tells you three cycles have been started without the lid being opened. The washer will not begin another cycle until you raise the lid. You see the light blinking and the Start button does nothing until the lid is opened.

Common causes of Lid Locked light flashing

Lid not raised between the last few cycles
Lid not closing completely afterward
Lid lock or switch signal at the control

✓ One safe check you can try

1. Lift the lid fully open. 2. Close it until it is fully down and the light settles. 3. Press Start to begin a new cycle. 4. If the light keeps flashing after you have opened and closed the lid, stop and let us look at it.

! Why to stop there

If the light still flashes after a real open and close, we test the lid lock and switch circuit.
We check the lid hinge and striker, since a lid that looks shut can still be a little off.
Our price is written before work starts, with a 30-day workmanship warranty on the repair.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Washer codes

85GE UltraFresh Washer Code 85: Voltage Out of Range Door / doorGE UltraFresh Washer Message "Door": Open the Door Before the Next Cycle LidGE Top-Load Washer Message "Lid": Open and Close the Lid to Continue Fill light blinkingGE Top-Load Washer Fill Light Blinking: Two Blinks for No Water, Three for Open Lid Wash and Rinse lights blinkingGE Spacemaker Washer Wash and Rinse Lights Blinking: Water Not Entering Two furthest lights flashingGE Top-Load Washer Two Furthest Lights Flashing: General Cycle Error PoGE Top-Load Washer Message "Po": Slow to Pump Out the Water bALAnCINgGE Top-Load Washer Message "bALAnCINg": Load Is Uneven in the Tub

Lid Locked light flashingLid Locked light flashing questions

What does a flashing Lid Locked light mean on my GE washer?

On a model with no text display, it means three cycles were started without the lid being opened. Raise the lid and close it again, and the washer will accept a new start.

Is this the same as the Lid message on display models?

Yes, it is the no-display equivalent. Washers with a text screen scroll the word Lid, while the GTW335 through GTW525 class and the unitized units flash this light.

Will opening the lid between every load stop it?

Yes, the count restarts each time the lid is opened. If the light still flashes after you do that, we test the lid lock circuit and the lid hardware.

Book a visit

Still unsure about Lid Locked light flashing?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 547-5545