Model library · GE Microwave & Advantium

JVM7195SKSS

GE JVM7195SKSS Sensor Microwave Repair

Most common issues on this model

Sensor cooking cycles ending early
Heating loss with the display and light working
Venting performance in ducted or recirculating setup
Door latch and switch operation

At 1.9 cu. ft., the JVM7195SKSS is a GE over-the-range sensor microwave oven. A cavity this size holds large casserole dishes, which is a reason owners choose it. It is vented by a two-speed fan and can be set up to recirculate air back into the room.

A larger over-the-range microwave puts more weight on the door and more demand on the vent. We check the door latch and switches first, because a door that is slightly off will stop the oven, then we test heating and the sensor program. If the fan is weak, we separate the cause: grease filters, a motor that is slow to start, or a ducted setup that has lost airflow.

For recirculating installations we also look at the filter condition and the vent path. We confirm the exact number from the label before ordering parts, tell you the price in writing first, and cover repairs with a 30-day workmanship warranty.

Key features

GE 1.9 cu. ft. over-the-range sensor microwave
Larger cavity within the over-the-range family
Sensor cooking controls
Two-speed venting with a recirculating option

→Codes

Error codes this model can show

Use ProbeGE Convection Microwave Message "Use Probe": Probe Not Detected TurnGE Microwave Message "Turn": Turn Food Over OVEN TOO HOT FOR USING ALTERNATE METHODGE Profile Microwave Message "OVEN TOO HOT FOR USING ALTERNATE METHOD": Cavity Above 200°F Oven is too hot for sensor cookGE Advantium Message "Oven is Cooling": Cool-Down After Speedcook Optimizing CooktimeGE Advantium Message "Optimizing Cooktime": Voltage Check HOTGE Convection Microwave Display Says HOT: Cavity Still Warm After Baking Reset Filter lightGE Over-the-Range Microwave Reset Filter Light: Six-Month Charcoal Reminder SENSOR ERROR - PLEASE CLEARGE Café Drawer Microwave Message "SENSOR ERROR - PLEASE CLEAR" or "KEYPAD SHORTED"

JVM7195SKSSJVM7195SKSS questions

Does the bigger 1.9 cu. ft. cavity change the repair?

Mostly it affects the door. A larger door puts more strain on the latch and hinge, so we check alignment and the switches carefully, then test heating and sensor cooking as usual.

Why does my JVM7195SKSS vent poorly in recirculating mode?

Recirculation depends on a clean filter and an open path. A loaded grease filter reduces airflow quickly. We inspect the filter and fan speeds before suggesting parts.

My sensor cooking shuts off before food is hot. What do you test?

We test the door switches and the sensor reading, then the heating side. Sensor programs end when the unit decides food is done, so a bad reading ends the cycle early.

Book a visit

Book repair for your JVM7195SKSS

Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.

(713) 547-5545