Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent GE specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 547-5545 Arrange a Repair
Error code · Washer

GE Profile UltraFast Combo Message: cycle canceled draining

On GE Profile UltraFast combo washer-dryers such as the PFQ97HSPVDS, Cycle Canceled Draining means the cycle ended before finishing, and the washer is draining the water out. It happens when a cycle has been paused for…

Low risk · DIY check OK
Arrange a Repair(713) 547-5545
Code
Cycle Canceled Draining
Appliance
Washer
Brand
GE
Warranty
30-day workmanship

What Cycle Canceled Draining means

On GE Profile UltraFast combo washer-dryers such as the PFQ97HSPVDS, Cycle Canceled Draining means the cycle ended before finishing, and the washer is draining the water out. It happens when a cycle has been paused for more than 24 hours or when the washer stops itself. A 4-minute lockout follows. You will see the display message and hear the pump emptying the drum.

Common causes of Cycle Canceled Draining

  • Cycle left paused over 24 hours
  • Washer stopped itself after an earlier error
  • Four-minute lockout after the cancel
✓ One safe check you can try

1. Let the washer finish draining on its own, which can take a few minutes. 2. Wait 4 minutes for the lockout to end. 3. Make sure the door is fully closed and nothing is caught in the seal. 4. Restart the cycle. 5. If the cycle cancels again, stop and call us.

! Why to stop there
  • A cycle that cancels over and over means the washer is stopping itself for a reason.
  • We look for what triggers the stop, such as drain, door or water supply conditions.
  • We give a written price before work.
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Washer codes

CLrFLtrGE Compact Washer Message "CLrFLtr": Drain Pump Filter Needs Cleaning Load RebalancingGE Front-Load Washer Message "Load Rebalancing": Washer Is Correcting an Uneven Load A problem has been detectedGE Profile Harmony Washer Message "A problem has been detected with this unit": Electronics Alert 70GE UltraFresh Washer Code 70: Inverter Start-Up Repeats 78GE UltraFresh Washer Code 78: Board Software Mismatch 85GE UltraFresh Washer Code 85: Voltage Out of Range Door / doorGE UltraFresh Washer Message "Door": Open the Door Before the Next Cycle LidGE Top-Load Washer Message "Lid": Open and Close the Lid to Continue
Cycle Canceled DrainingCycle Canceled Draining questions
What does Cycle Canceled Draining mean?

The washer ended the cycle before it finished and is now emptying the water from the drum. It is a normal protective step after a cycle was paused for more than 24 hours or the washer stopped itself.

When can I start a new cycle?

After about 4 minutes. Let the washer finish draining, make sure the door is fully closed, and then restart the cycle. If you start too early, the washer will simply refuse and the lockout continues.

It cancels again every time. What then?

Something is making the washer stop itself, such as a drain, door or water supply condition. We trace what triggers the stop, test the part involved and give you a written price before repairing it.

Book a visit

Still unsure about Cycle Canceled Draining?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 547-5545