Error code · Room Air Conditioner

GE Zoneline AZ90 Code 10: FRZ room freeze protection running

Low risk · DIY check OK

Code: 10
Appliance: Room Air Conditioner
Brand: GE
Warranty: 30-day workmanship

What 10 means

On GE Zoneline AZ90 and AZ91 single-package vertical units, including the AZ90E09D2C, code 10 means room freeze protection is working. The unit runs the high fan and electric heat until the room reaches 46°F, and the display shows FRZ during operation. It protects pipes and finishes in an unheated room. The newer AZ95 generation uses code 10 for a heat pump overload.

Common causes of 10

Room temperature dropped low enough to trigger protection
Unit left on in an unheated, vacant room
Room temperature sensor reading cold

✓ One safe check you can try

1. Hit ENTER to see the stored codes, and SCROLL to look at each in turn. 2. Expect the unit to run on its own until the room reaches 46°F. 3. Leave the unit powered so the protection can work. 4. Close windows and doors to keep the cold out. 5. Hold ENTER and SCROLL for 3 to 6 seconds to clear history if you wish.

! Why to stop there

If the room is not actually cold, the room sensor may be misreading.
We compare the sensor value with the real room temperature.
Any work comes with a written price first and a 30-day workmanship warranty.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Room Air Conditioner codes

Temperature display flashingGE Zoneline AZ41 AZ61 Temperature Display Flashing: Unit Alert 31GE Zoneline AZ95 Code 31: Lost contact with the 2-way thermostat 22GE Zoneline AZ90 Code 22: Outdoor Coil Frost Protection 32GE Zoneline AZ95 Code 32: Thermostat sensor data being ignored FRZGE Zoneline AZ90 Code FRZ: Room Freeze Protection 1GE Zoneline AZ90 Code 1: Button stuck down over 20 seconds E1GE Portable AC Code E1: Room Temperature Sensor 2GE Zoneline AZ90 Code 2: Supply voltage outside the allowed range

1010 questions

Is FRZ on the display a failure?

No. It tells you freeze protection is active. The unit is keeping the room from getting too cold. The room is being kept safe from freezing.

Why does it use electric heat?

The unit needs fast, dependable heat in cold conditions, so it uses the fan and electric heat until the room is safe. That keeps pipes and finishes safe.

Does AZ95 code 10 mean the same?

No. The AZ95 code 10 is a heat pump overload, so check the generation on your model label. The two codes share only a number.

Book a visit

Still unsure about 10?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 547-5545