Error code · Water Softener & Filtration

GE Softener GXSF27E Code ERR 01: Motor and switch circuit

ERR 01 appears on older GE water softeners with a numbered error chart, such as the GXSF27E, GXSF31E and GXSF40H from roughly 2005 to 2015. It points to a possible defect in the motor, in the…

Medium · inspection needed

Arrange a Repair (713) 547-5545

Code: ERR 01
Appliance: Water Softener & Filtration
Brand: GE
Warranty: 30-day workmanship

What ERR 01 means

ERR 01 appears on older GE water softeners with a numbered error chart, such as the GXSF27E, GXSF31E and GXSF40H from roughly 2005 to 2015. It points to a possible defect in the motor, in the wiring harness or connection to the switch, in the position switch, or in the control. The display shows ERR 01 until it is cleared. Newer GXSH and GXSF V-series units show only a plain Err, so this numbered version belongs to the older generation.

Common causes of ERR 01

Motor operation
Wiring harness and switch connection
Position switch
Control board

✓ One safe check you can try

1. Unplug the transformer. 2. Correct any loose or incorrect wiring at the board or switch. 3. Plug the transformer in and wait at least 6 minutes. 4. If ERR 01 returns, call us. Keep the brine tank lid closed while you wait. Water use is fine meanwhile.

! Why to stop there

The code lists several possible areas, and the cause has not been corrected if it returns.
We test the motor, harness and switch.
Motor and harness are tested before the control is named, with the price in writing.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Water Softener & Filtration codes

Err + fast blue lightGE SmartWater Softener GXSH40V Err Flashing: Electrical problem alert DAYS TO EMPTY flashingGE SmartWater Softener GXSH45V Low Salt: Days to empty flashing Blue indicator light flashingGE SmartWater Softener GXSH40V Blue Light Flashing: Power interruption ERR 02GE Softener GXSF31E Code ERR 02: Position switch ERR 03GE Softener GXSF40H Code ERR 03: Motor or harness ERR 04GE Softener Code ERR 04: Position switch or wiring harness ERR 05GE Softener Code ERR 05: Control board check Err 1, Err 3, Err 4, Err 5GE Smart Softener Err 1, 3, 4, 5: Control wiring

ERR 01ERR 01 questions

Why wait 6 minutes?

The control re-checks after about that long. If the code returns once the transformer is back in, the cause was not corrected and the area named by the code still needs work.

Is ERR 01 different from ERR 02?

Yes. ERR 01 includes the motor and the harness or switch connection. ERR 02 points to the position switch or the control, so the checks begin in different places.

Can I replace the motor?

We advise leaving that to a technician. Opening the control area and handling the motor can disturb wiring, and we give you a written price before any work.

Book a visit

Still seeing ERR 01?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 547-5545