Error code · Water Softener & Filtration

GE SmartWater Softener GXSH40V Err Flashing: Electrical problem alert

Medium · inspection needed

Code: Err + fast blue light
Appliance: Water Softener & Filtration
Brand: GE
Warranty: 30-day workmanship

What Err + fast blue light means

On GE SmartWater water softeners with electronic demand control, such as the GXSH40V and GXSH45V, a flashing Err with the blue light flashing four times per second means the system found an electrical problem. That can involve the timer, the motor, the wiring or another electrical part. The alarm beeps every 30 seconds between 8 AM and 8 PM. Until it is dealt with, the softener may not regenerate properly, and the water can turn hard.

Common causes of Err + fast blue light

Loose or incorrect wiring under the control cover, especially after installation
Whether the motor runs and finishes its cycle
Transformer connection
Timer or control board

✓ One safe check you can try

1. Press any button to silence the alarm. 2. Unplug the transformer from the wall outlet for a moment, then plug it back in. 3. The motor may run several minutes while the unit resets. 4. After a new installation, check for loose or incorrect wiring under the control cover; if Err returns, call us.

! Why to stop there

The error returns within about 6 to 8 minutes if the cause remains, which tells us the reset did not fix it.
We test the motor, wiring and board.
We test the motor run and the board output, and the repair has a 30-day workmanship warranty.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Water Softener & Filtration codes

DAYS TO EMPTY flashingGE SmartWater Softener GXSH45V Low Salt: Days to empty flashing Blue indicator light flashingGE SmartWater Softener GXSH40V Blue Light Flashing: Power interruption ERR 01GE Softener GXSF27E Code ERR 01: Motor and switch circuit ERR 02GE Softener GXSF31E Code ERR 02: Position switch ERR 03GE Softener GXSF40H Code ERR 03: Motor or harness ERR 04GE Softener Code ERR 04: Position switch or wiring harness ERR 05GE Softener Code ERR 05: Control board check Err 1, Err 3, Err 4, Err 5GE Smart Softener Err 1, 3, 4, 5: Control wiring

Err + fast blue lightErr + fast blue light questions

How soon does the error come back?

On current models it returns in about 8 minutes if the cause remains, and on older ones in about 6. That is how you know the reset did not solve it.

Is it safe to unplug the transformer?

Yes, it is the reset step the manual gives. Unplug the low-voltage transformer from the wall outlet for a moment, then plug it back in and let the motor finish.

Will my water be hard meanwhile?

Possibly, since the softener may not regenerate while the error is active. Tell us if you notice hard water, spotting or soap that does not lather.

Book a visit

Still seeing Err + fast blue light?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 547-5545