Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent GE specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 547-5545 Arrange a Repair
Error code · Cooktop

GE Induction Cooktop ON Indicator Blinking: Pan Type, Size or Position

On GE Profile and Café induction cooktops such as the PHP9030, PHP9036, PHP7030 and CHP90302, a blinking ON or Power indicator means the cooktop is not satisfied with the cookware. The cause is a pan that…

Low risk · DIY check OK
Arrange a Repair(713) 547-5545
Code
ON / Power indicator blinking
Appliance
Cooktop
Brand
GE
Warranty
30-day workmanship

What ON / Power indicator blinking means

On GE Profile and Café induction cooktops such as the PHP9030, PHP9036, PHP7030 and CHP90302, a blinking ON or Power indicator means the cooktop is not satisfied with the cookware. The cause is a pan that is not induction-compatible, a pan smaller than the element minimum, or a pan not positioned correctly on the element. Induction heats the pan itself, so without a suitable pan centered on the element, the cooktop will not deliver power.

Common causes of ON / Power indicator blinking

  • Cookware that is not induction-compatible
  • Pan smaller than the element's minimum size
  • Pan off-center on the element
  • Pan base warped so it does not sit flat
✓ One safe check you can try

1. Test the cookware with a magnet; it should stick firmly to the base. 2. Use a pan of the right size for the element. 3. Center the pan on the element and make sure it sits flat. 4. Try the element again once the pan is correct.

! Why to stop there
  • If the indicator still blinks with a magnetic, correctly sized and centered pan, we check the induction coil and the sensing that detects the pan.
  • We also test each element with known-good cookware.
Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.
→Same appliance

Other Cooktop codes

E alternating with cGE Profile Induction Cooktop E and c Alternating: Keypad Needs Clearing E alternating with oGE Profile Induction Cooktop E and o Alternating: Over-Temperature Alert Flashing codeGE Newer Cooktop Flashing Error Code: Write It Down and Call Power / ON indicator blinkingGE Radiant Touch Cooktop Power Indicator Blinking: Pads Touched Too Early WAITGE Glass Touch Cooktop Message "WAIT": Touch Board Starting Up Hot surface indicator stays onGE Cooktop Hot Surface Light Stays On: Radiant and Induction Behavior Control LockGE Cooktop Control Lock Light: Touch Controls Locked Out Element drops powerGE Induction Cooktop Element Drops Power Mid-Cook: Overheat Protection
ON / Power indicator blinkingON / Power indicator blinking questions
Why is my induction ON light blinking?

The cooktop cannot detect a suitable pan. Common reasons are non-induction cookware, a pan that is too small for the element, or a pan sitting off-center.

How do I know if my pan works on induction?

Hold a magnet to the bottom. If it clings firmly, the pan is likely compatible. If it does not stick, the cooktop will not heat it.

What if my pan passes the magnet test?

Check that it is large enough, flat and centered. If the light still blinks, one element may not be detecting pans, and we test it with known-good cookware.

Book a visit

Still unsure about ON / Power indicator blinking?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 547-5545