Error code · Cooktop

GE Profile Induction Cooktop Flashing E: Hardware Error Alert

High · stop use, call now

Code: E
Appliance: Cooktop
Brand: GE
Warranty: 30-day workmanship

What E means

On GE Profile induction cooktops PHP900 and PHP960, a flashing E by itself in the display is the error alert for a hardware error. The cooktop's control has detected a problem it cannot clear on its own, and it shuts the affected element down rather than keep heating. This differs from E alternating with c or o, which point to the keypad or over-temperature. A lone E means no owner adjustment is listed, and the cooktop should be looked at.

Common causes of E

Internal control or induction electronics error
Power supply or wiring condition the control cannot clear by itself
Damage to the induction circuit from a power surge or overheating

✓ One safe check you can try

1. Turn the cooktop off and remove any pans. 2. Make sure the keypad is dry and nothing is resting on it. 3. Note whether the E is flashing alone or alternating with another character. 4. Call for service and do not keep trying to heat with the alert showing.

! Why to stop there

Because this alert covers a hardware error, we read the full alert, check the control board connections and power feed, and test the induction circuit.
We do not guess at a part before testing.
Written price before work, with a 30-day workmanship warranty.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Cooktop codes

E alternating with cGE Profile Induction Cooktop E and c Alternating: Keypad Needs Clearing E alternating with oGE Profile Induction Cooktop E and o Alternating: Over-Temperature Alert Flashing codeGE Newer Cooktop Flashing Error Code: Write It Down and Call ON / Power indicator blinkingGE Induction Cooktop ON Indicator Blinking: Pan Type, Size or Position Power / ON indicator blinkingGE Radiant Touch Cooktop Power Indicator Blinking: Pads Touched Too Early WAITGE Glass Touch Cooktop Message "WAIT": Touch Board Starting Up Hot surface indicator stays onGE Cooktop Hot Surface Light Stays On: Radiant and Induction Behavior Control LockGE Cooktop Control Lock Light: Touch Controls Locked Out

EE questions

What does a flashing E mean on my induction cooktop?

On PHP900 and PHP960 models it is the alert for a hardware error. The control found a problem it cannot clear, and the cooktop needs to be examined.

How is this different from E alternating with c or o?

Those combinations have their own meanings: c is a keypad that senses constant touch, and o is over-temperature. A lone flashing E has no owner fix, so the cooktop should be checked.

Can I keep using the other elements?

Stop using the cooktop while the alert is showing. Continuing to try can hide the cause. Turn it off and call us so we can test the control and induction circuit.

Book a visit

Still seeing E?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 547-5545